Opt for the very best in solo pleasure by bringing home the Future Pro 3 airbag heated thrusting masturbator!
This high-tech masturbator has many exciting features to thrill you. Choose from 10 different thrusting modes for customised stimulation. Best of all, the unique dial allows you to module the speed to find the perfect rhythm. The 10 airbag modes allow you to choose the level of pressure on your penis. The heating function and audio feature (with 3 types of moaning) will also enhance your experience. You can listen to the arousing audio feature with a pair of headphones or by connecting your toy to a speaker via Bluetooth. The display screen will show you the mode and battery level, so you'll never run short of steam. For easier cleaning, this masturbator features a fragrance diffuser and a self-drying sleeve mode.
The Future Pro 3 masturbator is truly a technological marvel. Once you've tried it, you'll never get enough.
It has a total length of 11.50 inches and a 4.75-inch width. It has an internal length of 5.00 inches and an internal diameter of 1.50 inches. It comes with a USB charging cable, a fragrance, and two sleeves: a classic textured sleeve and a vaginal sleeve with pleasure nubs.

How to use the masturbator:
1. Before using it for the first time, make sure that you have charged the masturbator for at least two hours with the USB cable included.
2. Remove the cover, remove the circular foam part, and hold down the power button for 3 seconds to turn on the sex toy.
Press the power button to stop the thrusting.
3. Explore the 10 thrusting modes by pressing the + (to move to the next mode) and - (to return to the previous mode) buttons
To set the speed of the thrusting, rotate the dial around the screen.
4. Start one of the three audio feature recordings by pressing the button above the + button.
Change the recording by pressing the same button. Use the dial above the masturbator screen to turn the volume up or down.
5. You can also connect a speaker or wireless headphones to your toy by holding down the Bluetooth button for a few seconds.
6. The heating function is located on the cover of the masturbator. To turn on the heating function, press the flame button.
The sleeve will reach maximum temperature after 10 minutes. While the heating function is charging, the masturbator will make a noise that will stop when the maximum temperature is reached.
7. Above the screen there is a small grill for the fragrance diffuser. Remove the grill by sliding it upwards to put a drop of perfume on it.
8. The two wave buttons control the airbag function. To turn on mode 1, press the bottom airbag button. Press it again to start the following modes. Press the upper airbag button to return to the previous mode.
9. The button above the airbag buttons will lower the sleeve into the masturbator tunnel. The button above the airbag buttons moves the sleeve up into the masturbator tunnel. These buttons can only be used when the thrusting is stopped.
The sleeve must be lowered into the tunnel so that it can be replaced (another sleeve comes with your masturbator) or removed and cleaned.
10. After each use, remove the sleeve and clean it with water and mild soap free of alcohol and silicone. Then, put it back in the masturbator and close it. Turn on the self-drying function by pressing the button between the Bluetooth button and the heating function button.
11. To turn off your masturbator, hold down the power button for 3 seconds.

For more pleasure and comfort, use a water-based lubricant.

Make cleaning your toy's orifices a breeze by adding our complete cleaning and drying kit to your order, available on the product page or in our Sex toy cleaner category.

Need some advice?

See all of our advice